Helical Bevel Gear Reducer Motovario B Series

HELICAL BEVEL GEAR REDUCERS – CAST IRON
B – IB – PB – CB

Kandungan teknologi B-Series pengecil gigi memungkinkan untuk rasio kinerja / umur yang luar biasa. Unit-unit gigi yang sangat serbaguna yang berhasil digunakan dalam sejumlah besar aplikasi industri dan sipil. unit B-Series menawarkan nilai yang sangat baik untuk uang dan output rasio torsi / berat, terutama mengingat bahwa mereka perlu servis sangat terbatas.

Tersedia dalam besi cor dari ukuran 063-163.

Sertifikasi Tersedia: ATEX 2GD / 3GD

Characteristics:

• Sizes: 060-080-100-125-140-150-160
• Available versions: B – fitted for motor coupling, IB – with input shaft, CB – with compact motor, PB – fitted for motor coupling with flexible joint
• Casing with feet FC, flange SC and universal UC
• Power up to 90 kW
• Gears hardened and tempered with shaved or ground profile
• Gearing with 3 reduction stages
• Gleason spiral bevel gear pairs with run-in profile, mounted as second reduction stage for a higher resistancee
• Reduction ratios between 5,71 and 187,24
• Torque max 13.000 Nm and admissible radial loads max 80.000 N
• High-strength casings optimized with FEM analysis and input and output flanges of grey cast-iron G200 to ensure top level performances and high reliability
• Load capacity calculated and verified according to ISO 6336 and AGMA 2001
• Painted with RAL 5010 blue epoxy-polyester powder
• Accessories: torque arm, output flange, output shaft, shrink disk, backstop device, protection cover kit, viton oil seals, reinforced output, assembly/disassembly kit

Range :

HELICAL BEVEL GEAR REDUCERS – ALUMINIUM
BA – IBA – CBA

Characteristics:

• Sizes: A40-A50-A70
• Available versions: BA – fitted for motor coupling, IBA – with input shaft, CBA – with compact motor
• Universal casing
• Power up to 5,5 Kw
• Gears hardened and tempered with shaved or ground profile
• Gearing with  2 and 3 reduction stages
• Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
• Reduction ratios between 7,62 and 442,76
• Torque max 450 Nm and admissible radial loads max 10.000 N
• Casing in die-cast aluminium alloy
• Load capacity calculated and verified according to ISO 6336 and AGMA 2001
• Painted with RAL 5010 blue epoxy-polyester powder
• Accessories: torque arm, output flange, output shaft, shrink disk, viton oil seals

Range: